Using an Alternate Client

Openconnect on Ubuntu23

Step #1: Open the terminal and enter the following command to install the OpenConnect network manager:

sudo apt-get install openconnect network-manager-openconnect network-manager-openconnect-gnome

Step #2: Click on the Network icon in the top corner, and then click the settings gear to open the network settings. Then click the “+” sign next to VPN.

Image Modified

Image Modified

Step #3: Select Multi-protocol VPN client (openconnect).

Image Modified

Step #4: Enter the following info:

Image Modified

Step #5: Click on IPv6 and select Disable. Then click “Add” on the top right side.

Image Modified

Step #6: Your VPN profile has been created. Turn on its switch to connect to the VPN.

Image Modified

Step #8: Enter your ASURITE in the Username box, put your ASURITE password in the first password box, and then the second password box would be your DUO method, for example. “push” for a push notification to your device. Once these have been entered, click on “Login”.

Image Modified

Openconnect on MacOS

1. Install Homebrew

2. Open a terminal window and install Openconnect and Openconnect-GUI via homebrew

brew install openconnect openconnect-gui

3. Run Openconnect-GUI (you will need to right-click on the icon and choose open the first time you launch it)

4. - Click on the Gear icon and choose New Profile (advanced)

Image Modified

 Enter the following:

Name: ASU Cisco VPN

Gateway: sslvpn.asu.edu

Username: yourasurite

Click Save

Click Connect

Image Modified

The first time you try to connect it will pop up this window.

Image Modified

5. Click Accurate Information

6. Click Connect again, the first Password Dialog is your ASURITE Password

Image Modified

7. Click OK, the second Password is your preferred 2 factor authentication method, i.e. Push, Phone

On successful login the Lock icon will turn Green.

Image Modified